FA Maker

Mild Steel Heavy Duty Screw Auger / Screw Conveyor.

Distance from inlet to outlet is 2200mm (Overall length is 2600mm)

Diameter is 200mm

Flight thickness 6mm

Flight pitch 150mm

200mm inlet and outlet

Driven by Reynold Geared motor 1.1kw at 79 rpm, 415V

Runs Well, last used to move lime powder.

JACMOR ENGINEERING 200 X 2200

Flat belt conveyor. Mild steel construction. 3 Phase 415V variable speed gearbox. Stainless steel table attached. Belt dimensions: Length 6700mm, Width 590mm, Height 870mm from floor Overall dimensions: Length 7000mm, Width 1350mm Table dimensions: 1360mm X 600mm Belt speed ranges from: 1.1 metre/min - 3.3 metre/min Unit in excellent condition and runs well. Ex chocolate factory.

UNKNOWN 6.7 X 0.87

Mild steel screw conveyor 0.75kw, 400V, SEW geared motor. Gearbox output 87rpm. Auger 66rpm. Auger length 3400mm Overall length 3700mm Diameter 150mm Flight pitch 140mm Flight thickness 5mm Inlet diameter 125mm Outlet 170mm X 170mm Runs Well

SATAKE 3400

Fresco systems stainless steel screw feeder with mixer. 
0.37kw Geared motor @ 56RPM 
Mixer 0.37kw Geared motor @18rpm 
Auger Hopper volume: Approx 30L 
Hopper opening dimension: 300mm 
Outlet dimension: 130mm 
Screw diameter approx: 40mm 
Total Screw Length 600mm long

FRESCO SYSTEMS 50

Rubber belt conveyor with corrugated sidewall. 
2.85 Metres long, 300mm wide. Belt is 850mm from ground. 
Speed approx 18m/min. 
Geared motor 3 phase 0.75kW 415V 
Unit in good condition and runs well. 
Minor cosmetic damage. 
Overall dimensions: 3000mm L x 700mm W x 920mm H

NOT SPECIFIED UNKNOWN 285

Flat belt food grade conveyor 1.9m long x 1.1m wide 
St/Steel frame, on wheels. 
Currently setup on an angle 
Discharge height is 700mm from the ground. 
The St/Steel sides are 480mm high 
Stop/Start controls, 240V single phase. 
Ex Food Factory

UNKNOWN 1.9X1.1

Mild steel conveyor with food grade plastic belt. 0.55kw SEW 19 rpm Geared drive. Complete with pneumatic arm to push product off the conveyor from the side. Cnveyor deck height is 950mm from ground. Mounted on castor wheels. Ex confectionary plant.

CONTECH ENGINEERING 3.1 X 300

Sanitary Conveyor. Stainless steel construction. Single phase 240V with VSD, Start/Stop and optical sensor. 0.18kW geared motor. Automatic and manual mode. Overall dimensions: Length 5750mm, Width 600mm, Height 920mm Belt dimensions: Length 5500mm, 300mm Wide Conveyor mounted to casters. Belt speed 3.4 metres/min. Unit in excellent condition and runs well.

UNKNOWN 5.5X0.3

Incline roller type conveyor with extendible coveyor section at one end. 4 mt long x 600mm wide incline section. Discharge height is approx 1.5mt. 1.6mt long x 600mm wide extendible section, will go out to 4 mt. Conveyor is on heavy duty castor wheels. Made by Industrial Conveying Australia.

ICA 4 MT X 600

Flat belt conveyor. 240V 0.18kW geared motor. Belt length 3100mm. Belt width 120mm. Belt height 930mm. Runs well.

UNKNOWN 120X3100

Mild steel pipe type screw conveyor.Heavy duty7 mm Screw thickness.200mm screw pitch250mm diam x 6.2m long4kw SEW 68 rpm. Drive 415v.Last used on Gypsum.

JACMOR ENGINEERING 6.2 X 250

Rubber belt conveyor.
 3.3m long x 330mm wide 
SEW geared motor drive 0.37kw, 415V @ 54rpm 
On wheels, ex confectionary factory.

SEW 3.3 X 0.33

Find Conveyors AND Elevators For Sale from FA Maker.

New & Used Conveyors AND Elevators For Sale in Australia

FA Maker

Sale Price

JACMOR ENGINEERING 200 X 2200

UNKNOWN 6.7 X 0.87

SATAKE 3400

FRESCO SYSTEMS 50

NOT SPECIFIED UNKNOWN 285

UNKNOWN 1.9X1.1

CONTECH ENGINEERING 3.1 X 300

UNKNOWN 5.5X0.3

ICA 4 MT X 600

UNKNOWN 120X3100

JACMOR ENGINEERING 6.2 X 250

SEW 3.3 X 0.33

FA Maker

Dealer Address