FA Maker

Rotary accumulation table with fibreglass top.

1000mm Diameter.

870mm High

3 Phase 0.10kW 415V geared motor.

5 RPM

Runs well.

UNKNOWN 1000

Stainless steel conveyor with food grade belt.Very slow speed. Approx 3 rpm .1kw geared drive. Belt Width 1100 Length 1800Height 945Ex food plant.

CONTECH ENGINEERING 1800 X 1100

Screw feeder 304SS. Twin Screw.Main Auger 200MM diam x 2m long, small auger 80mm diam x 2m.Main drive 2.2kw SEW,small drive 1.1kw is missing.Auger RPM 128.

BUDPAK 2 X 0.2

Mild steel SATAKE screw conveyor. 2 piece screw conveyor. Driven by 0.75kW 415V 3 Phase SEW geared motor. Screw operating at 66 RPM Overall length: 6170mm Screw length: 5800mm Flight diameter: 150mm Flight pitch: 145mm Flight thickness: 5mm Drive end: 3150mm Driven end: 3020mm Input: 100mm diameter Two outlets. Runs well.

SATAKE 6170

MAGUIRE - Sweeper conveying system. 
The Sweeper is designed to empty a gaylord or octobin with zero operator intervention during unloading, leaving minimal material by the end of the unloading process. Maguire Sweeper conveying systems reduce labor intervention and make automatic unloading as efficient as possible. This translates to fast payback. 
The Sweeper runs consistently by these 4 key ...

MAGUIRE SW-4815

Flat belt conveyor with reject mechanism. Last used on confectionary. 2.4mt long x 450mm wide. Stainless steel below the belt. Mild steel frame. Fitted with SEW geared drive. 0.37kw 36rpm.

CONTECH ENGINEERING 2.4 X 450

Two conveyors in one. One slow conveyor and one fast conveyor bolted up together.
;First section is 1.5m long x 350mm wide ss SEW drive .75kw @ 81 rpm
Second section is .9m x 350mm wide ss SEW drive .75kw @ 150 rpm 
Was last used to move cardboard boxes in beverage factory.

SEW 2.4M X 0.35M

Fresco systems stainless steel screw feeder with mixer. 
0.37kw Geared motor @ 56RPM 
Mixer 0.37kw Geared motor @18rpm 
Auger Hopper volume: Approx 30L 
Hopper opening dimension: 300mm 
Outlet dimension: 130mm 
Screw diameter approx: 40mm 
Total Screw Length 600mm long

FRESCO SYSTEMS 50

Incline cleated conveyor 
3m long x 400mm wide 
Cleats with sidewalls. 
Runs at 1m per 3 seconds. 
It takes 9 seconds for an item to travel the length of the belt. 
Runs well, 415V 3 phase power.

UNKNOWN CONVEYORS & ELEVATORS

Stainless steel screw auger flight 400mm diameter. 
2 lengths approx 3m each. 
Bare shaft, no trough or drive motor.

JACMOR ENGINEERING 400 X 3

2 Units available. One unit on casters. 3 phase 415V 0.55kW 3000mm discharge height. Tube diameter 50mm or 2 inch Overall height 3400mm. Discharge diameter 150mm Other unit sitting on its base 3 phase 415V 0.55kW 2900mm discharge height Tube diameter 50mm or 2 inch Overall height 3200mm. Discharge diameter 150mm Start/Stop control. One hopper missing. 2 units available. Price per unit.

FLOVEYOR SS FV

Stainless steel conveyor with food grade belt. Height is adjustable. Currently setup for incline. Length: 1700mm Width: 1520mm Height: Low 800mm High 1100mm 0.37kW, 3 Phase, 415V geared drive motor. Speed: 22 Metres/Min Unit in good condition and runs well.

NIKODAN CONVEYOR SYSTEMS A/S 1700X1520

Find Conveyors AND Elevators For Sale from FA Maker.

New & Used Conveyors AND Elevators For Sale in Australia

FA Maker

Sale Price

UNKNOWN 1000

CONTECH ENGINEERING 1800 X 1100

BUDPAK 2 X 0.2

SATAKE 6170

MAGUIRE SW-4815

CONTECH ENGINEERING 2.4 X 450

SEW 2.4M X 0.35M

FRESCO SYSTEMS 50

UNKNOWN CONVEYORS & ELEVATORS

JACMOR ENGINEERING 400 X 3

FLOVEYOR SS FV

NIKODAN CONVEYOR SYSTEMS A/S 1700X1520

FA Maker

Dealer Address