FA Maker

Flat belt conveyor with side tables. 
2.3m long x 0.3m(belt width) 
The side table height is adjustable and currently has some removable rollers placed on them. 
The belt is driven by a SEW geared motor and has a belt tensioner. 
The conveyor is on wheels and came out of a food factory.

SEW 2.3 X 0.3M

Large cyclone/silo. Cyclone has a steep cone and is mounted on legs. It was built for a specific purpose but never used. Some surface rust. Main Body

CYCLO CYCLONE

10,000kg Hoist 
Make: Stahl.
Model N425 10T Electric Hoist.
2 speed hoist motor.
Drum Lift 16m Rope.
415V/3/50.
No pendant, Hoist has been test run. 22/2/18.

STAHL 10000

Tower Thermal Cooling Tower.
Model TXF 40.  Sidedraft.
PERFORMANCE :
Flowrate Max. 8.5 l/s up to 12.2.
Entering Water Temp. 35 oC
Leaving Water Temp. 28 oC
Ambient Outside Wet Bulb Temp. 20 oC
MODEL SELECTED : TXF-40, SidedraftÂ® Series
Motors 415v .37kw x 2.

TOWER THERMAL TXF40

Cleated incline conveyor. All stainless steel frame with a food grade cleated belt. Cleats are 75mm high 280mm wide belt x 2.1m incline section and 800mm flat section. Height from ground to loading hopper is 900mm Height from ground to belt discharge is 2.2m Height from ground to the bottom of the outlet hopper is 1.7m. Mounted on castor wheels. SEW 0.55kw 31 rpm geared motor. Ex Confectionery ...

ITERRA INDUSTRIES 280 X 2.1

Features:--
Inlet	         - 3
Outlet	 - 3
RPM	         - 90
HP	         - 10

Description:--
Chocolate Pump Jacketed Direct to 10HP 90RPM Gear Motor.

GERMAN LOBE PUMP

Heavy Duty trough conveyor.

Impact loading rollers.

Heavy duty rubber belt. 10mm thick

7.5 metres long x 800mm wide

On support frame to make it inclined with castor wheels. Discharge height approx 3 m .

4 kw 136 rpm Geared drive 415 volt 32 amp plug.

Stop start controls.

Gal steel frame.

A&D 7.5 X 800

NEW - St/Steel Pin Mill 
These pin mills are great for fine grinding of dry materials. 

Product is fed into the hopper and then into the centre of the pin mill. 
Different screen sizes can be fitted to change the fineness of the output. 
The bearing housing is jacketed to help keep it cool if running for long periods of time. 
Screen diameter 320mm x 1mm screen hole size. 
Other screen sizes a...

FAM 30B

Stainless steel screw auger flight 400mm diameter. 
2 lengths approx 3m each. 
Bare shaft, no trough or drive motor.

JACMOR ENGINEERING 400 X 3

ASEA 55kw, 975rpm, 415v, 98 amp.
Foot Mount, 
Frame MBRF 26 (280 frame).
Fitted with 9D section 460mm OD V pulley, Taper lock Bush 75mm.
Megg tested 18/6/19 Very good.

ASEA MBRF 26

Features:--
Litres	                    70
Width or Diameter	 0.18
Length	                 0.78
Height	                 0.61
Arrangement	     Vertical

Description:--
Stainless steel water tanks, fully enclosed with multiple outlets and water level indicator.

Total of 70 units available.

UNKNOWN STAINLESS STEEL

Karl Schnell triple stage emulsifier. Running a 55KW 1450 RPM motor fitted on a stainless steel frame. Unit has stainless steel wetted parts and an adjustable cutting head, currently setup with a 4mm dia hole size screen(mild steel). Unit would suit any food or wet product for fine grinding and size reducing. 350mm x 450mm opening.

KARL SCHNELL FLM2

Find Plant and Equipment For Sale. Browse 601 listings from FA Maker.

New & Used Plant and Equipment For Sale

FA Maker

Sale Price

SEW 2.3 X 0.3M

CYCLO CYCLONE

STAHL 10000

TOWER THERMAL TXF40

ITERRA INDUSTRIES 280 X 2.1

GERMAN LOBE PUMP

A&D 7.5 X 800

FAM 30B

JACMOR ENGINEERING 400 X 3

ASEA MBRF 26

UNKNOWN STAINLESS STEEL

KARL SCHNELL FLM2

FA Maker

Dealer Address