FA Maker

Jacketed Digester or Paddle Blender. 
Stainless steel bowl with mild steel end plates and mild steel shaft and blades. 
Electric heating elements heat up an oil filled jacket. 
10m3 bowl capacity 

Internal width 2250mm 
Internal Height 2390mm 
Internal length 3800mm 
Maximum overall width 2750mm 
Transport height 3050mm, with lid ram tower mounts removed, without 3550mm 
Transport length 7000m...

CUSTOM 10000

Large heavy duty stainless steel dual stage hammer mill.

Complete with feedchute, duscharge chute, St/Steel dust collector and control board.

The two hammer mills can be run into each other (dual stage) or run as just one, the lower one can slide out of the way and it can be run as a single stage mill.

This mill and dust collector was imported from Canada in 2021 and has had very little use ...

2021 BUFFALO RA-25-HSS

EBARA Centrifugal Pump. Stainless steel. Model: 3LSF 65-125/4. Power: 3 Phase, 415V, 4 kW. RPM: 2910 Volume: 36-114 m3/Hr Head: 19.8-6.3 metres. Unit in good condition.

EBARA 3LSF 65-125/4

Champion CSD75, 75kW, 100Hp, Sullair powered energy efficient air end over 400cfm. 
Acoustically housed in very good condition.
Make Champion
Model CSD75
Motor 75kw (100Hp)
Capacity 400cfm
Pressure 8 bar
Located Melbourne

CHAMPION CDS75

Geared motor. 4kw / 37rpm Bonfiglioli/WEG foot mount 415V/50hz

BONFIGLIOLI 37 37

Auto Start Transformer.
ABW Engineering Syd.
300kw 415volt.
Dimensions 590x400x280mm.

ABW ENGINEERING 300KW

SPX centrifugal pump with a 5.5kw motor at 2900rpm. 
2 inch inlet and one inch outlet. 
Capacity 20,000lt per hr.

SPX W 35/35

Alfa Laval Centrifugal Pump

Designed to meet the hygienic requirements of the dairy, food and beverage and personal care industries, LKH centrifugal pumps increase process productivity while providing high efficiency and gentle product handling.

Model: LKH 5 

Power: 1.1kW 415V 3 Phase

Suction: 2``/51mm/DN50

Discharge: 1.5``/38mm/DN40

Capacity: 17.5m³/hr - 17,500 Litres per hour

Runs Well

ALFA LAVAL LKH5

Brand new GRUNDFOS inline single stage centrifugal pump. 3 Phase, 415V, 2.2 kW motor. RPM: 2900 Volume: 20.5 cubic m/Hr Head: 19.5 metres p/t: 16/90 bar/C max Bronze Impeller Grundfos TP pumps are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and primely for applications such as heating/cooling/district energy. The pumps are fitted with fixed speed motors.

GRUNDFOS TP 40-240/2

NEW - LAFERT - Stainless steel worm gearbox. 
Suitable for washdown areas. 
Size: 63mm 
Ratio 36:1 
147Nm 
Hollow output shaft diameter: 25mm 
Input shaft diameter: 24mm 
3 Units available. 
Price per unit. 
Output shafts available for an additional fee.

LAFERT PI63UN

ABB Double inlet Fan.Model CLD 445.15000cfm low pressure.Outlet size 600 x 850mmNo motor fitted requires 5.5kw or bigger.

ABB CLD 445

Promag 53   Promag H - Item was removed from operating factory. 
The flowmeter for smallest flow rates with a modular electronic concept and/ or with flexible system integration. 
Application: 
- The measuring principle is virtually independent of pressure, density, temperature and viscosity.
- For the smallest flow quantities and demanding hygienic applications. 
Make: Endress   Hauser 
Model:...

ENDRESS + HAUSER 53H50-1NX5/0

Find Plant and Equipment For Sale. Browse 597 listings from FA Maker.

New & Used Plant and Equipment For Sale

FA Maker

Sale Price

CUSTOM 10000

2021 BUFFALO RA-25-HSS

EBARA 3LSF 65-125/4

CHAMPION CDS75

BONFIGLIOLI 37 37

ABW ENGINEERING 300KW

SPX W 35/35

ALFA LAVAL LKH5

GRUNDFOS TP 40-240/2

LAFERT PI63UN

ABB CLD 445

ENDRESS + HAUSER 53H50-1NX5/0

FA Maker

Dealer Address