FA Maker

These series of stainless steel pumps feature a unique one piece volute casing that are produced using an advanced computer controlled Plasma stamping system that ensures total quality control during manufacture. With the smooth surfaces of stamped stainless steel, this results in consistent high standard products, of superior quality and high efficiency.

Applications:

- Plant services
- Wate...

EBARA FC-50.100 (3M 50-160/7.5

Mil-Tek Vertical Baler 

The A205 baler is the third generation of Mil-tek pneumatic balers, featuring cutting-edge pneumatic technology that uses compressed air through the cylinder to press and release the pressing plate. 

Running exclusively on compressed air avoids the risk of contamination from hydraulic oil and means that the A205 runs at a quiet operational level.

Covering a floor spac...

2015 MIL-TEK 205

INOXPA - S-15 A Centrifugal Pump.

The sanitary and cost-efficient design of the Hyginox SE centrifugal pump makes it particularly suitable as main process pump in the dairy, beverage, pharmaceutical and cosmetic industries.

Hyginox SE is a range of close-coupled centrifugal pumps with sanitary design, compact and efficient. It is made of a cold-formed stainless steel casing, stainless steel o...

INOXPA S-15

Proccess Systems pneumatically actuated ball valve. Actuator model: SR 88 Pmax 8-BAR T: -20C... 85C 1.5 Inch valve.

PROCESS SYSTEMS SR 88

Galvanised steel platform with stairs.

Platform dimensions 3500mm x 7000mm x 2700mm High.

Stair landing dimensions 695mm x 1105mm.

Stair Overall dimensions are 700mm W x 3990mm L x 2700mm H

Platform has been removed from warehouse and flat packed.

Hopper's and rotary valve are NOT included.

UNKNOWN 3500X7000

PASILAC FLOW - Stainless steel sanitary pump. 
3 Phase, 415V, 1.5kW, 2860rpm ASEA motor. 
Open impeller design. 
Impeller diameter: 120mm. 
2 Inch inlet, 1.5 Inch outlet. 
Pump tested with water and will pump approximately 10,000 litres per hour 
Unit in good condition and runs well.

PASILAC K1-400N-120

APV Stainless pump.
 
Inlet 76mm, Outlet 51mm (3`` x 2``)
 
Model: W80/50 
 
Motor 30kw 2pole 415v.
 
Imp Diam 255mm
 
Head 90m,  Capacity 54M3/hr.

APV W80/50

Sustainable and economical application under hygienic conditions.
The centrifugal pump GEA Hilge TP is designed for the hygienic
pumping in different applications. Low flow velocities and gentle
discharge of media through the spiral housing enables extremely
gentle product handling.

Stainless steel.
Model: TP16040
Power: 3 Phase, 380-415V, 50Hz, 30kW / 40HP
Speed: 2955 RPM
Suction: 6``
Dischar...

GEA TP16040

Endress   Hauser - Proline t-mass 65 - Mass Flow Meter. 
Model: 65F80-AK2AG1AAABBA 
YOM: 2017 
20-55V AC/16-62V DC 14VA/8W 50-60Hz 
I-OUT (HART), f-OUT 
Proline t-mass F 
3 inch ANSI 150 Sch40 
P: -0.5...19BAR/ -7.25...275PSIG 
T: -20 degrees C... 100 degrees C 
Materials: 316, 316L, 1.4404 
Seal: Viton / PEEK 
Benefits: 
- Measurement of gases and gas mixtures in small line sizes 
- Plant safe...

2017 ENDRESS + HAUSER PROLINE T-MASS 65F

Mild steel hopper, last used for sand.

Approx 750 lt capacity

1.5m dia  x 250mm straight side x 500mm cone on top and bottom.

2 inch gate valve at the top.

Forklift pockets.

2 available, price per hopper.

UNKNOWN 750

Flat belt food grade conveyor.

5.5m long x 340mm wide.

stainless steel frame with mild steel legs mounted on castors.

SEW 0.37kw 21-104 rpm Mechanical variable speed drive.

800mm  height from ground.

CONTECH ENGINEERING 5.5 X 340

The impeller of RCN-series pumps is of closed type designed with wide cross sections between the blades to pump, without any clogging problems, liquids with non-fibrous solid particles. The casing of RCN/RCNS series pumps is provided with a replaceable wear ring, the casing of RCPN/RCPNS series pumps is provided with a replaceable wear plate to pump liquids with abrasive solid particles. The RC...

1990 ROBUSCHI RCN 65-360

Find Plant and Equipment For Sale. Browse 603 listings from FA Maker.

New & Used Plant and Equipment For Sale

FA Maker

Sale Price

EBARA FC-50.100 (3M 50-160/7.5

2015 MIL-TEK 205

INOXPA S-15

PROCESS SYSTEMS SR 88

UNKNOWN 3500X7000

PASILAC K1-400N-120

APV W80/50

GEA TP16040

2017 ENDRESS + HAUSER PROLINE T-MASS 65F

UNKNOWN 750

CONTECH ENGINEERING 5.5 X 340

1990 ROBUSCHI RCN 65-360

FA Maker

Dealer Address