FA Maker

High Speed Disperser. (Ex. Rated)

Pneumatically raised and lowered.

Reeves variable speed drive with WEG Ex rated motor.

Power: 3 Phase, 415V, 0.75kW

Speed: 430 - 1580 RPM

Dispersion Blade Dia: 150mm

Lifting Height: 750mm

Shaft Length: 750mm

Platform has a backstop for paint pot to be secured to.

Disperser complete with Ex. starter controls and E-stop.

1 Unit available.

Disperser was...

REEVES 150

NEW - LAFERT - Stainless steel worm gearbox. 
Suitable for washdown areas. 
Size: 85mm 
Ratio 28:1 
347Nm 
Hollow output shaft diameter: 34mm 
Input shaft diameter: 28mm 
1 Unit available. 
Output shafts available for an additional fee.

LAFERT PI85UN

400L

Mild steel jacketed melting tank with slow speed mixer.

Last used for mixing and keeping warm, confectionary cream.

2 inch outlet.

690mm dia x 1070mm high.

Mixer: 3 Phase, 415V, 0.25kW, 8RPM.

Tank is heated via a 193 Watt electric element with temp controller.

Current set point is 60C. Maximum set point 110C.

2 Hinged lids with cutout saftey switches.

Forklift pockets to underside...

UNKNOWN 400

These series of stainless steel pumps feature a unique one piece volute casing that are produced using an advanced computer controlled Plasma stamping system that ensures total quality control during manufacture. With the smooth surfaces of stamped stainless steel, this results in consistent high standard products, of superior quality and high efficiency.

Applications:

- Plant services
- Wate...

EBARA FC-50.100 (3M 50-160/7.5

Masticator/ Grinding Mill / Spike Mill

All Stainless steel Masticator Mill and platform, last used to break up frozen Tubs/Barrrels of fruit/meat.

The frozen blockes were lifted up via the bin lifter, then slide down the St/Steel chute onto the spiked mill for shredding.

Large 650mm dia inlet onto a spiked drum running at 20rpm, 3kw motor, 415V.

Fed by a 4m High Bin lifter.

St/Steel Platfo...

SEW SS 650

Item is USED - Sandmill, vertical gringng mill 22kw, 415V, for wet grinding paint or pigment.

DRAIS 70

Stainless steel centrifugal pump. 3 Phase, 415V, 11kW motor. 2943 RPM Volume: Approximately 30,000 L/Hr or 500 L/min Open impeller design. 8 Inch impeller. 3 Inch suction port 2 Inch discharge port. New mechanical seal. New casing o-ring. Motor overhauled. Unit runs well.

UNKNOWN PROCESSING PUMPS

Mono - Stainless steel helical rotor pump.

2 Pumps available. 

3 Phase, 1.5kW, 415V.

Pump 1: 230 RPM, approximately 2,100 l/hr.

Pump 2: Variable speed 190-1000 RPM, approximately 1,700-9,400 l/hr.

These pumps were for filling drums.

Control panel with Start/Stop and a filling timer 0-60 seconds.

Shut off solenoid on discharge pipe.

Suction/Discharge: Flange 2 Inch (Pump), 1.5 inch BSM f...

MONO SH60

Stainless Steel (SS316) Self Cleaning CIP Spray head for inside tanks. 
Also known as a rotary jet head. 
Alfa Laval Toftejorgâ€™s TZ-74 rotary jet head was developed to meet the highest standards of efficiency, reliability and hygiene within the brewery, food, dairy, beverage and other industries. The TZ-74 has the pressure and impact capacities required for thorough vessel cleaning. Fitted wi...

ALFA LAVAL TZ-74

Stainless Steel Tube-in-Tube Heat Exchangers
Two identical tube-in-tube heat exchangers constructed from stainless steel, each with the following specifications:

Shell Diameter: 200 mm

Length: 2.0 meters

Inner Tubes: 10 tubes per unit

Inner Tube Diameter: 20 mm (nominal)

Tube Length: 2.0 meters

Configuration: Tube-in-tube (10 inner tubes housed within a single outer shell)

Material: Stai...

UNKNOWN SS TT HE

450Lt stainless steel tank with mixer.

Mounted on castor wheels.

SEW geared drive 1.1kw 26 rpm.

Hinged lid for adding ingredients, also a 200mm dia inlet fitted with a 5 mm screen and air vibrator.

Last used to mix flour and water.

1m dia x 600mm straight side.

100mm x 120mm outlet.

Flat bottom.

Ex food plant.

2 available. Price per tank.

S/S S/S

CSF - Italy

Stainless steel centrifugal process pump.

Closed coupled hygienic centrifugal pumps with open impellers. CS Series pumps meet the highest requirements of the food, pharmaceutical, chemical and water treatment industries.

The pumps are designed to a modular concept, resulting in a large number of models and a massive performance range.

When combined with the extremely robust cons...

CSF CSX50-260-2-40

Find Plant and Equipment For Sale. Browse 635 listings from FA Maker.

New & Used Plant and Equipment For Sale

FA Maker

Sale Price

REEVES 150

LAFERT PI85UN

UNKNOWN 400

EBARA FC-50.100 (3M 50-160/7.5

SEW SS 650

DRAIS 70

UNKNOWN PROCESSING PUMPS

MONO SH60

ALFA LAVAL TZ-74

UNKNOWN SS TT HE

S/S S/S

CSF CSX50-260-2-40

FA Maker

Dealer Address