FA Maker

Stainless steel centrifugal pump. 3 Phase, 415V, 11kW motor. 2943 RPM Volume: Approximately 30,000 L/Hr or 500 L/min Open impeller design. 8 Inch impeller. 3 Inch suction port 2 Inch discharge port. New mechanical seal. New casing o-ring. Motor overhauled. Unit runs well.

UNKNOWN PROCESSING PUMPS

The Multipulse range of positive displacement flowmeters offer a high level of accuracy and repeatability. 

These precision flowmeters are used for flow rate measurement in flow monitoring and control applications and for totalising in dispensing and batching. 
Multipulse flowmeters are suitable for use with a wide range of clean liquids including viscous lubricants, chemicals, food bases and ...

TRIMEC MP050

Endress   Hauser - Proline t-mass 65 - Mass Flow Meter. 
Model: 65F80-AK2AG1AAABBA 
YOM: 2017 
20-55V AC/16-62V DC 14VA/8W 50-60Hz 
I-OUT (HART), f-OUT 
Proline t-mass F 
3 inch ANSI 150 Sch40 
P: -0.5...19BAR/ -7.25...275PSIG 
T: -20 degrees C... 100 degrees C 
Materials: 316, 316L, 1.4404 
Seal: Viton / PEEK 
Benefits: 
- Measurement of gases and gas mixtures in small line sizes 
- Plant safe...

2017 ENDRESS + HAUSER PROLINE T-MASS 65F

2 inch Sanitary lobe pump with jacketed casing. Last used for chocolate. Unibloc brand lobe positive displacement pumps set the industry standard in high performance sanitary pumps. 4kw 100 rpm. Current setup pump will do 41 Lt minute. Pump

UNIBLOC PD450

Mono progressive cavity type pump.

Hygenic Range Model S: SS041

Part Number: SS041MS1R5

3 Phase, 415V, 0.75kW SEW Gearmotor.

Speed: 76 RPM

Capacity: Approx 1,300 l/hr

Size: 2.5 Inch Inlet/Outlet

Please see attached performance curve for more information.

Pump is mounted to heavy duty trolley.

Unit in good condition and runs well.

MONO SS041MS1R5

The OPTIFLUX 6300 is an electromagnetic flowmeter (EMF) for advanced hygienic applications in the food sector. 
The high-end flowmeter is particularly suitable for blending, dosing or filling applications where a high accuracy (0.2% of measured value) is priority and extensive diagnostics are required. 
In addition, it can even be used for low conductivity liquids (e.g. glucose, fruit concentra...

1997 KROHNE OPTIFLUX 6300 C

Mono - Stainless steel helical rotor pump.

2 Pumps available. 

3 Phase, 1.5kW, 415V.

Pump 1: 230 RPM, approximately 2,100 l/hr.

Pump 2: Variable speed 190-1000 RPM, approximately 1,700-9,400 l/hr.

These pumps were for filling drums.

Control panel with Start/Stop and a filling timer 0-60 seconds.

Shut off solenoid on discharge pipe.

Suction/Discharge: Flange 2 Inch (Pump), 1.5 inch BSM f...

MONO SH60

Jacketed Gear Pump or Chocolate Pump.

Make: Varisco Italy.

Model: V 60-2.

Size: 2 Inch In/Out.

Jacketed Pipe Sizes: 3 Inch In/Out

3 Phase, 415V, 1.1kW SEW gearmotor.

Pump Speed: 56RPM.

Pump Volume: 28 l/min or 1,680 l/hr.

Pump Displacement: 0.5 l/rev.

Pump has jackets on suction and discharge sides.

Last used for pumping chocolate.

VARISCO V 60-2

Used - Progressive Cavity Pump.
3 Phase, 415V, 0.72kW, 1380 RPM gearmotor with a final output speed of 328 RPM.
2.5 Inch inlet and outlet.
Capacity approximately 5,000 l/hr @ 0 BAR or 3,200 l/hr@ 6 BAR.
See attached pump curve for more information.
Pump in excellent condition and runs well.

ALL PURPOSE PUMPS RHR551

The impeller of RCN-series pumps is of closed type designed with wide cross sections between the blades to pump, without any clogging problems, liquids with non-fibrous solid particles. The casing of RCN/RCNS series pumps is provided with a replaceable wear ring, the casing of RCPN/RCPNS series pumps is provided with a replaceable wear plate to pump liquids with abrasive solid particles. The RC...

1990 ROBUSCHI RCN 65-360

GRACO - Fast-Flo air powered pump.

Part Number 226945

Fast Flo 1:1 pumps are designed to operate at air input pressures up to 12 bar (1.2 MPa, 180 psi) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon-feed applications. Ideal for lower viscosity fluids with plate (flat) check options.

Maximum delivery up to 19 lpm ...

GRACO 226945

Ebsray Internal Gear Pumps - Bare Shaft
Size: Inlet /Outlet 65mm x 65mm. (2 1/2 inch)
Model MD 25E.
Capacity 500l/min at 460rpm, Max 11kw, 100psi. No motor currently fitted

EBSRAY MD 25E

Find Pumps - Valves For Sale. Browse 144 Pumps - Valves listings from FA Maker.

New & Used Pumps - Valves For Sale in Australia

FA Maker

Sale Price

UNKNOWN PROCESSING PUMPS

TRIMEC MP050

2017 ENDRESS + HAUSER PROLINE T-MASS 65F

UNIBLOC PD450

MONO SS041MS1R5

1997 KROHNE OPTIFLUX 6300 C

MONO SH60

VARISCO V 60-2

ALL PURPOSE PUMPS RHR551

1990 ROBUSCHI RCN 65-360

GRACO 226945

EBSRAY MD 25E

FA Maker

Dealer Address