FA Maker

MAGUIRE - Sweeper conveying system. 
The Sweeper is designed to empty a gaylord or octobin with zero operator intervention during unloading, leaving minimal material by the end of the unloading process. Maguire Sweeper conveying systems reduce labor intervention and make automatic unloading as efficient as possible. This translates to fast payback. 
The Sweeper runs consistently by these 4 key ...

MAGUIRE SW-4815

Stainless steel conveyor with food grade belt.Very slow speed. Approx 3 rpm .1kw geared drive. Belt Width 1100 Length 1800Height 945Ex food plant.

CONTECH ENGINEERING 1800 X 1100

Rubber belt conveyor with corrugated sidewall. 
2.85 Metres long, 300mm wide. Belt is 850mm from ground. 
Speed approx 18m/min. 
Geared motor 3 phase 0.75kW 415V 
Unit in good condition and runs well. 
Minor cosmetic damage. 
Overall dimensions: 3000mm L x 700mm W x 920mm H

NOT SPECIFIED UNKNOWN 285

Flat belt, slat conveyor, 3.0m long x 420mm wide. Fitted with SEW geared motor drive, 415V, 0.75kW Stainless steel frame, last used to move beverage bottles. Speed 48 Metres/min Runs well.

SEW 3.1 X 0.35

Stainless steel flat belt conveyor. Length: 2500mm Belt Width: 490mm Height: 600mm low side

UNKNOWN 2500X490

Metal detection reject conveyor. Detector scans product for metal and if detected, product gets rejected with burst of air into reject chute. Conveyor is 3600mm long Belt is 140mm wide and has a rise of approximately 1000mm. Detection Systems metal detector. Pnuematic rejectetion. Requires electrical board.

UNKNOWN 140

Flat belt conveyor. Stainless steel construction. 240V with a Variable speed controller and E-stop. Dimensions: Length 2690mm, Belt Width 500mm, Height 925mm SS Table 1500mm X 445mm Ex chocolate factory. Unit in good condition. Unit runs well.

HARWOOD ENGINEERING 2.7 X 0.5

Flat belt conveyor with reject mechanism. Last used on confectionary. 2.4mt long x 450mm wide. Stainless steel below the belt. Mild steel frame. Fitted with SEW geared drive. 0.37kw 36rpm.

CONTECH ENGINEERING 2.4 X 450

Stainless steel conveyor with food grade belt. Height is adjustable. Currently setup for incline. Length: 1700mm Width: 1520mm Height: Low 800mm High 1100mm 0.37kW, 3 Phase, 415V geared drive motor. Speed: 22 Metres/Min Unit in good condition and runs well.

NIKODAN CONVEYOR SYSTEMS A/S 1700X1520

Flat belt conveyor. Mild steel construction. 3 Phase 415V variable speed gearbox. Stainless steel table attached. Belt dimensions: Length 6700mm, Width 590mm, Height 870mm from floor Overall dimensions: Length 7000mm, Width 1350mm Table dimensions: 1360mm X 600mm Belt speed ranges from: 1.1 metre/min - 3.3 metre/min Unit in excellent condition and runs well. Ex chocolate factory.

UNKNOWN 6.7 X 0.87

Flat belt conveyor with side tables. 
2.3m long x 0.3m(belt width) 
The side table height is adjustable and currently has some removable rollers placed on them. 
The belt is driven by a SEW geared motor and has a belt tensioner. 
The conveyor is on wheels and came out of a food factory.

SEW 2.3 X 0.3M

Two conveyors in one. One slow conveyor and one fast conveyor bolted up together.
;First section is 1.5m long x 350mm wide ss SEW drive .75kw @ 81 rpm
Second section is .9m x 350mm wide ss SEW drive .75kw @ 150 rpm 
Was last used to move cardboard boxes in beverage factory.

New & Used Conveyors For Sale in Australia

FA Maker

Sale Price

MAGUIRE SW-4815

CONTECH ENGINEERING 1800 X 1100

NOT SPECIFIED UNKNOWN 285

SEW 3.1 X 0.35

UNKNOWN 2500X490

UNKNOWN 140

HARWOOD ENGINEERING 2.7 X 0.5

CONTECH ENGINEERING 2.4 X 450

NIKODAN CONVEYOR SYSTEMS A/S 1700X1520

UNKNOWN 6.7 X 0.87

SEW 2.3 X 0.3M

SEW 2.4M X 0.35M

FA Maker

Dealer Address