FA Maker

Helical rotor pump (Progressive cavity pump) 3 Phase, 1.1kW, 415V, 1440 RPM Electric motor with gearbox. Output speed: Approx 380 RPM Inlet/Outlet: 2.5 Inch Approximate Discharge: 9 m3/hr @ 0 BAR or 6.5 m3/hr @ 6 BAR. (Please see attached performance curve for more information) Unit in good condition and runs well. 2 Units available, price per unit.

ALL PURPOSE PUMPS RHR571

Mono - Stainless steel helical rotor pump.

2 Pumps available. 

3 Phase, 1.5kW, 415V.

Pump 1: 230 RPM, approximately 2,100 l/hr.

Pump 2: Variable speed 190-1000 RPM, approximately 1,700-9,400 l/hr.

These pumps were for filling drums.

Control panel with Start/Stop and a filling timer 0-60 seconds.

Shut off solenoid on discharge pipe.

Suction/Discharge: Flange 2 Inch (Pump), 1.5 inch BSM f...

MONO SH60

Aerotech Air Fan

Backward Curve Impeller

Inlet 400mm

Outlet: 400mm x 450mm

Motor: 7.5kw 2915rpm 415V

Capaciy: 9000CFM

Pressure: 2KPA

Fitted with silencer

Runs Well

AEROTECH K-45

Alfa Laval Centrifugal pump, with a 11kw motor and 2900rpm.

2 -1/2 inch inlet and outlet and a 205mm impeller.

 Approx: 75.0 Head (m)
Capacity: 40.0 (m3/h)
 Inlet Pressure: 10 bar
 Temperature: 140 C (EPDM)

Applicable Duties: Milk, Milk/Cream Pasteurization, Cultured Milk, Whey, Ice cream pasteurization, wort, beer, beer pasteurization â€" feeder, juices, drinks, wine, drinks with pulp/fibre...

ALFA LAVAL LKH25

NEW - MOTOVARIO Worm Gearbox - NRV 110.

Cast Iron Housing

Ratio 15:1

Hollow Output: 42mm Diameter

Drive Shaft: 28mm Dia. X 60mm

Optional output shaft available for an additional fee.

1 Unit available.

MOTOVARIO NRV 110

Large heavy duty stainless steel dual stage hammer mill.

Complete with feedchute, duscharge chute, St/Steel dust collector and control board.

The two hammer mills can be run into each other (dual stage) or run as just one, the lower one can slide out of the way and it can be run as a single stage mill.

This mill and dust collector was imported from Canada in 2021 and has had very little use ...

2021 BUFFALO RA-25-HSS

Stainless steel fully open impeller pump(approx 320mm dia), 316SS, with 75kw Siemens 4pole electric motor. 
Inlet 10inch. 
Outlet 8 inch 
Capacity up to 1700m3/hr  30m head. 
Ideally suited for corrosives and abrasives, handles solids and stringy fibres with ease. 
Allows for simple restoration of clearances when wear takes place. 
Back pump-out vanes reduce pressure on the shaft seal, reduce a...

GOULDS CENTRIFUGAL PUMP

Masticator/ Grinding Mill / Spike Mill

All Stainless steel Masticator Mill and platform, last used to break up frozen Tubs/Barrrels of fruit/meat.

The frozen blockes were lifted up via the bin lifter, then slide down the St/Steel chute onto the spiked mill for shredding.

Large 650mm dia inlet onto a spiked drum running at 20rpm, 3kw motor, 415V.

Fed by a 4m High Bin lifter.

St/Steel Platfo...

SEW SS 650

APV Puma pump. 
Series 5.
Suction: 3 Inch 
Discharge: 2 Inch 
Very high flow, low pressure.
Power: 11kW / 15HP, 3 Phase, 415V 
RPM: 2925 
Impeller Diameter: 7 inch 
Max flow rate: 72,000 litres per hour
Motor overhauled. 
Choice of either non flushed mechanical seal or flushed mechanical seal. 
Runs well

APV PRODUCTS 3 X 2

The H4000 is a Woltmann-type meter designed for measuring bulk flows of cold potable water for revenue billing in commercial or industrial applications and distribution system monitoring.
Ideal for:

Commercial and industrial facilities
Water distribution networks
Building management systems
Smart water grid applications
Make: Elster
Model: H4000
D97 6.132.41
Qn: 15m3/hr
CIB 16 BAR 30 degrees C...

ELSTER H4000

Montgomery USA

18 '' x 8 SPC pulley

Requires motor. 75kw -250kw (Depending on application)

Rotor RPM 1200

25 Anvils.

Fitted with 60mm opening screen. Comes with 3 x spare screens and a spare shaft.

Feed opening 1280mm x 600mm

Air swept OR drop through discharge.

Typical applications include bark and wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5" thick.

Other ...

MONTGOMERY INDUSTRIES 50 PM-ER

Heavy-Duty 4`` Gear Pump - ROPER (USA)

Robust industrial gear pump designed for reliable transfer of high-viscosity liquids.

4`` inlet and outlet connections

Bare shaft configuration (motor not included)

Displacement: 83.3 litres per 100 revolutions

Recommended motor size: 7.5 kW

Flow rate: approximately 570 L/min at 750 rpm

Suitable for pumping viscous products including fuels, asphalt,...

ROPER 3622 HBFLX

Find Plant and Equipment For Sale in Victoria. Browse 602 listings from FA Maker.

New & Used Plant and Equipment For Sale in Victoria

FA Maker

Sale Price

ALL PURPOSE PUMPS RHR571

MONO SH60

AEROTECH K-45

ALFA LAVAL LKH25

MOTOVARIO NRV 110

2021 BUFFALO RA-25-HSS

GOULDS CENTRIFUGAL PUMP

SEW SS 650

APV PRODUCTS 3 X 2

ELSTER H4000

MONTGOMERY INDUSTRIES 50 PM-ER

ROPER 3622 HBFLX

FA Maker

Dealer Address