FA Maker

Features:--
HP	                - 20
Ratio	                - 4.44:1
Input Speed	- 1500

Description:--
EX ALBURY

FLENDER E140A

Trough Conveyor with food grade belt.

2.4 Metres long, 290mm wide. (Belt)

Speed approx 10m/min.

Geared motor 3 phase, 0.37kW, 415V, 1.15A.

Frame has some scratches and dents but otherwise runs nicely.

It's recommended to adjust belt, post installation.

Ex confectionary manufacturer.

UNKNOWN 2.4 X 290

Powerscreen vibrating screen, used for scalping.

This machine is a single deck 6 ft x 4 ft deck with 60mm perforated holes in the screen.

This screener is powered by hydraulics and comes with a Hydraulic Power Pack (18.5kw, 415V).

Ideal for scalping. Screen sizes can be changed over.

Mounted on steel skid.

Heavy duty screener.

POWERSCREEN 6FT X 4FT

Used Tronics Labeller, Front wrap pressure sensitive labeller capable of labelling a wide range of round, flat sided and oval bottles at speeds which could vary from 20 to 160 bottles per minute depending upon the bottle size, label dimensions and type of application. Equipped with product conveyor, side wrap conveyor, microprocessor-controlled panel interface. 

Last used to wrap a round bottl...

TRONICS TDS

Stainless steel steps with platform. Ideal for a process plant .7 steps to platform. Steps 835 wide x 290 deep. Platform 600 x 835. 2 Hand Rails 1 meter high. 1280 floor to top Platform. Total length 2340mm 2 available, one has hand rail on one side only. 1400mm long platform on single hand rail set. price each

SS SS STAIRS

NEW - Stainless Steel Inline Emulsifier. 
High speed and high shear mixer and emulsifier. 
This unit will also transfer liquids from one tank to another or recirculate liquids from the base of a tank back up to the top of the tank. 
Capacity: Up to 10,000Litres/hr 
Motor: 7.5kw, 415V, 2900rpm 
Mechanical seal.
 Inlet/Outlet: 50mm triclover fitting 
Drain: 25mm Triclover Fitting with valve 
Over...

FAM SX75

YOM: 1993 Was last used for Photographic Emulsion Capacity: 300-400 L/Hr Inlet Pressure: 3-10 Bar (low speed viscosity-high speed viscosity) Max Pump Pressure: 800 bar Cooling Water Volume: Eccentric Oil 90 l/hr Oil volume: Eccentric Sump 11.5-12.5 L Control Voltage 220V AC Operating Voltage 3 x 415V, Motor 15kw, 1440rpm Complete with Variable Speed drive.

APV HP/INDUSTRY 16.51H

Complete Stainless Steel food grade Vegetable trimming line - 8 stations

Was last doing 1000units/hour.

Suitable from Broccoli, COS, Cauliflower and other vegetables.

Complete with Bin Tipper, in-feed conveyor, 8 work stations, 3 discharge conveyors for waste and final product conveyor onto a packing table.

All currently installed and can be seen operating.

3phase 415V power.

Located in G...

CAMPBELL ENGINEERING 1000

Stainless steel mixing tank. Approx 1500lt. Cone bottom to a 50mm outlet. 1.1kw 710 rpm mixer with twin propeller type. Manhole in the top and a breather. 1.1m straight side x 1.3 m dia Load cells fitted to legs no digital readout.

Disperser with 4000Litre St/Steel Tank.

30Kw variable speed drive motor

540-2800RPM

415V

St/Steel Shaft with dual blades.

Mild steel platform (Air compressor not included).

REEVES 4000

High speed mixer fitted with dispersion blade. 
Stainless steel contact parts. 
Ex Motor: 3 Phase, 415V, 11kW, 2935 RPM, 19 Amp, Exe Zone 1. 
Motor runs well. 
Mixer directly coupled to motor. 
No mechanical seal. 
Slight wear on shaft. 
Shaft length 1450mm. 
Price is for item condition as is.

New & Used Plant and Equipment For Sale

FA Maker

Sale Price

FLENDER E140A

UNKNOWN 2.4 X 290

POWERSCREEN 6FT X 4FT

TRONICS TDS

SS SS STAIRS

FAM SX75

APV HP/INDUSTRY 16.51H

CAMPBELL ENGINEERING 1000

A A

REEVES 4000

CMG 11

UNKNOWN LABORATORY EQUIPMENT

FA Maker

Dealer Address