FA Maker

Montgomery USA

18 '' x 8 SPC pulley

Requires motor. 75kw -250kw (Depending on application)

Rotor RPM 1200

25 Anvils.

Fitted with 60mm opening screen. Comes with 3 x spare screens and a spare shaft.

Feed opening 1280mm x 600mm

Air swept OR drop through discharge.

Typical applications include bark and wood scrap such as blocks, cutoffs, edgings, slabs and trim ends up to 5" thick.

Other ...

MONTGOMERY INDUSTRIES 50 PM-ER

Used - Progressive Cavity Pump.
3 Phase, 415V, 0.72kW, 1380 RPM gearmotor with a final output speed of 328 RPM.
2.5 Inch inlet and outlet.
Capacity approximately 5,000 l/hr @ 0 BAR or 3,200 l/hr@ 6 BAR.
See attached pump curve for more information.
Pump in excellent condition and runs well.

ALL PURPOSE PUMPS RHR551

PASILAC FLOW - Stainless steel sanitary pump. 
3 Phase, 415V, 1.5kW, 2860rpm ASEA motor. 
Open impeller design. 
Impeller diameter: 120mm. 
2 Inch inlet, 1.5 Inch outlet. 
Pump tested with water and will pump approximately 10,000 litres per hour 
Unit in good condition and runs well.

PASILAC K1-400N-120

Heavy-Duty 4`` Gear Pump - ROPER (USA)

Robust industrial gear pump designed for reliable transfer of high-viscosity liquids.

4`` inlet and outlet connections

Bare shaft configuration (motor not included)

Displacement: 83.3 litres per 100 revolutions

Recommended motor size: 7.5 kW

Flow rate: approximately 570 L/min at 750 rpm

Suitable for pumping viscous products including fuels, asphalt,...

ROPER 3622 HBFLX

Mild steel hopper, last used for sand.

Approx 750 lt capacity

1.5m dia  x 250mm straight side x 500mm cone on top and bottom.

2 inch gate valve at the top.

Forklift pockets.

2 available, price per hopper.

UNKNOWN 750

Stainless steel knife gate valve. Pneumatically operated. Size 14 Inch / 350mm

UNKNOWN 14

Masticator/ Grinding Mill / Spike Mill

All Stainless steel Masticator Mill and platform, last used to break up frozen Tubs/Barrrels of fruit/meat.

The frozen blockes were lifted up via the bin lifter, then slide down the St/Steel chute onto the spiked mill for shredding.

Large 650mm dia inlet onto a spiked drum running at 20rpm, 3kw motor, 415V.

Fed by a 4m High Bin lifter.

St/Steel Platfo...

SEW SS 650

Heavy Duty Stainless Steel 1000Litre IBC

Manhole in the top (needs new rubber seal)

2inch cam lock outlet with valve.

Clean inside.

TRANS-TAINER 1000

High Speed Disperser. (Ex. Rated)

Pneumatically raised and lowered.

Reeves variable speed drive with WEG Ex rated motor.

Power: 3 Phase, 415V, 0.75kW

Speed: 430 - 1580 RPM

Dispersion Blade Dia: 150mm

Lifting Height: 750mm

Shaft Length: 750mm

Platform has a backstop for paint pot to be secured to.

Disperser complete with Ex. starter controls and E-stop.

1 Unit available.

Disperser was...

REEVES 150

Galvanised steel platform with stairs.

Platform dimensions 3500mm x 7000mm x 2700mm High.

Stair landing dimensions 695mm x 1105mm.

Stair Overall dimensions are 700mm W x 3990mm L x 2700mm H

Platform has been removed from warehouse and flat packed.

Hopper's and rotary valve are NOT included.

UNKNOWN 3500X7000

EBARA Centrifugal Pump. Stainless steel. Model: 3LSF 65-125/4. Power: 3 Phase, 415V, 4 kW. RPM: 2910 Volume: 36-114 m3/Hr Head: 19.8-6.3 metres. Unit in good condition.

EBARA 3LSF 65-125/4

Item is USED - Sandmill, vertical gringng mill 22kw, 415V, for wet grinding paint or pigment.

DRAIS 70

Find Plant and Equipment For Sale. Browse 594 listings from FA Maker.

New & Used Plant and Equipment For Sale

FA Maker

Sale Price

MONTGOMERY INDUSTRIES 50 PM-ER

ALL PURPOSE PUMPS RHR551

PASILAC K1-400N-120

ROPER 3622 HBFLX

UNKNOWN 750

UNKNOWN 14

SEW SS 650

TRANS-TAINER 1000

REEVES 150

UNKNOWN 3500X7000

EBARA 3LSF 65-125/4

DRAIS 70

FA Maker

Dealer Address