FA Maker

SPX Stainless steel lobe pump.
SPX DW4/073/10
4" BSM rectangular inlet
3" BSM outlet
Rotor: SS 316L High temperature 180c
Capacity: 73litre/100 revs
Current set up tested to 150L/min or 9000 L/Hr
3 Phase 2.2kW 415V geared drive.
Lobe pump is set up in vertical arrangement and mounted on stainless steel frame.
Arrangement can be m...

SPX DW4/073/10

IBC pump unloader with flow meter.
McNaught M series flow meter.
Last used to unload thick liquids out of an IBC.
Complete with JEC 2 inch lobe pump. 1.5 kw 60 rpm. 50mm inlet /outlet
Pump is set up to pump at 1450 lt/hr. Running at 600 rpm it will pump around 14000lt per hour.

JEC JP220

Un-used SPX DW4/073/10 bare shaft St/Steel lobe pump.
Still mounted to original skid new in 2019 and never installed.
4" BSM rectangular inlet
3" BSM outlet
Rotor: St/Steel 316L High temperature 180c
Capacity: 73litre/100 revs
Performance test in factory: Flow: 608 L/Min @ 1200rpm -  Test liquid: Water

3inch Chocolate Pump / Lobe Pump Jacketed.
Requires a 10HP @ 90RPM Geared Motor.

GERMAN 3

<h3> Waukesha SS 2.5 inch lobe pump with pressure relief.</h3>
<h3>Complete with SS base and geared motor.</h3>
<h3> 7.5kw at 378 rpm approx 13000 liters per hour.</h3>
<h3>Model 060U2 Waukesha pump specifications:</h3>
<ul>
<li>Displacement - 0.153 GPR (0.579 LPR)</li>
<li>Nominal capacity up to 90 GPM...

WAUKESHA 060U2

2 inch Lobe pumps last used on tallow.11kw 135 rpm Genat and Wood geared motors. Two complete units available. Ex Weston Biscuits.

EBSRAY T200M

AERZEN GM16-12

Bare shaft 3.5inch dia.
2000-8000m3/hr. Good condition.

AERZEN GM 17.14

Stainless steel sanitary lobe pump.
Make: SSP
Currently set up with a .75kw 271 rpm SEW geared drive.
Pump is setup on a stainless steel base frame. Looks to be in very good condition internally. 
With current setup pump will do around 3000 litres per hour.
Pump maximum capacity is 10000lt /hr this would be acieved by increasing the speed of the pump to 100...

SSP S2-0018-H07

Waukesha  S/Steel Lobe Pump. Model MFC  250 (Metered flow control) Max RPM 520 .070gal per rev.  Nominal flow 36gpm. Max pressure 100psi. 1.1/2  x 1 1/2 inlet /outlet.
Currently bare shaft Used Pump as is condition.

WAUKESHA MFC 250

Stainless steel sanitary lobe pump.
SSP 
Currently set up with a 0.55 kw 193 rpm SEW geared drive.
Pump is setup on a stainless steel base frame. Looks to be in very good condition internally. 
With current geared motor setup pump will do around 3000lt per hour. Pump has the capacity to do up to 16000lt/hr by increasing the speed.
40mm inlet and outlet

New & Used Lobe For Sale in Australia

FA Maker

Sale Price

SPX DW4/073/10

JEC JP220

SPX DW4/073/10

GERMAN 3

WAUKESHA 060U2

EBSRAY T200M

AERZEN GM16-12

AERZEN GM 17.14

SSP S2-0018-H07

WAUKESHA MFC 250

SSP S3-0027-H10

DRESSER 10 X 12 RVS2

FA Maker

Dealer Address