FA Maker

Stainless steel Knife Mill / Knife Chopper

A set of knives spin at high speed inside a 120L St/Steel tub.

500mm dia x 500mm deep

Discharge is via a 150mm x 120mm trap door.

415V 3 phase power.

Looks to be unused.

UNKNOWN 120

Item is USED - Sandmill, vertical gringng mill 22kw, 415V, for wet grinding paint or pigment.

DRAIS 70

Masticator/ Grinding Mill / Spike Mill

All Stainless steel Masticator Mill and platform, last used to break up frozen Tubs/Barrrels of fruit/meat.

The frozen blockes were lifted up via the bin lifter, then slide down the St/Steel chute onto the spiked mill for shredding.

Large 650mm dia inlet onto a spiked drum running at 20rpm, 3kw motor, 415V.

Fed by a 4m High Bin lifter.

St/Steel Platfo...

SEW SS 650

Conti Italy 2 Roll Refiner/Crusher. Model RAF 1002C
2 Stone cylinders 100 x 300. Adjustable Gap.
2 Stainlees scraper blades.
Stainless collection tray.
Drive 1.5kw 415v Motor.

Run and tested.

CONTI RAF1002C

Pin mill. 3 Phase, 415V, 1.1kW drive motor at 2935RPM. Approx pin mill speed 10,000RPM. SS Hopper with 200mm throat an 20mm inlet. Outlet 150mm Start/Stop control. Mounted on frame and casters. Overall dimensions: 1050mm X 900mm X H1670mm Unit in ok condition. Unit runs.

KEK MK16

12 x Swinging hammers 5 inch long. Mill has a 2mm screen. Main drive is a 11kw 1460 RPM motor belt driven.

PRESIDENT TYPE 12

Hosokawa Micron Pulverizer MP3 Hammer Mill.

2mm screen currently fitted - finer screens can be fitted

22kw Drive Motor 415v  .

Mill speed 4600rpm
Water cooled Pulverizing chamber.
Hammers Stirrup Type.
Can do heat sensitive materials.
Bottom fitting screen, any mesh size can be fitted to the screen frame.
Spare Bearing Housing.

There are two types of hammers: the ``stirrup,`` recommended wh...

HOSOKAWA MP3

Heavy Duty Lump Breaker, 7.5kw motor @ 55rpm reduced to 5rpm on the blades. 400mm x 400mm throat, 50mm gap between fixed blades, last used to break up blocks of resin. Can be used to break up many materials. Belt conveyor discharge.

UNKNOWN LUMP BREAKER

Fryma Model MZ110 toothed colloid mill.

The FRYMA MZ110 is an inline toothed colloid mill suitable for slurries, that grinds solids and homogenizes the slurry.

The required fineness can be adjusted by means of adjusting the grinding gap between the stator and the rotor heads.

FRYMA Toothed Colloid Mills are used for the processing / grinding of fluid up to highly viscous products, such as: c...

FRYMA MZ110

ENGSKO Stone Flour Mill (Grindmaster 950) is an Industrial mill used for grinding whole grain into grits or milled flour.

Input Capacity (fine/course) 250-800kg/hr

Capacity below 200 my (wheat) 70%-28%

Capacity above 260 my (wheat) 20%-22%

Capacity above 600 my (wheat) 10%-50%

18kw 415V drive motor, 300rpm.

Overall dims: 1.8m long x 1m wide x 1.6m tall, weight 1250kg

 

Comes with:

- Co...

ENGSKO GRINDMASTER 950

The FrymaKoruma perforated disc mill is used for grinding, pulping and mashing of lumpy products, eg fruit, vegetables, paper, leather waste, meat, fish, pet food. 
St/Steel Plate with 10mm holes and cutting head. 
150mm inlet 150mm x 100mm outlet, 30kw, 2900rpm motor, 415V. 
All st/steel contact parts.

New & Used Mills For Sale in Australia

FA Maker

Sale Price

UNKNOWN 120

DRAIS 70

SEW SS 650

CONTI RAF1002C

KEK MK16

PRESIDENT TYPE 12

HOSOKAWA MP3

UNKNOWN LUMP BREAKER

FRYMA MZ110

ENGSKO GRINDMASTER 950

FRYMA KORUMA ML250

FA Maker

Dealer Address